The simplicity of Dante® with the power you need.

Now you can power SSP6 Multiducers using audio from your Dante network. Our PoE++ amps are single cable devices designed for use in small or medium zones, with no need for a local power outlet. They use a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.

The PoE++LZ220 provides 2 channels at 20 watts each in 4 / 8 ohms (the SSP6 uses an 8 ohm load) while the CV140 provies 1 channel of 40 watts at 70V/100V. (To use the CV140 with your SSP6 Multiducer, you’ll need the RA-T1 transformer.)

Leverage the CAT5e/6 cable already in use throughout a facility to add speakers easily and quickly, with the ease of control and audio routing that your Dante network brings to the building.

SpecificationsPoE++CV140
Configurations70/100V
Power Output1 x 40W
Control OptionsDante®
DSP processes/EQEQ optimized for SSP6
Frequency Response100 Hz – 20 kHz, 70.7 / 100V
ConnectorsInput: Dante (RJ45); Output: Euroblock
RegulatoryUL 2043 listed, CE, RoHS
Weight1.0 lbs (0.45 kg)
Dimensions1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

SpecificationsPoE++LZ220
Configurations4/8/16 Ω
Power Output2 x 20W
Control OptionsDante®
DSP processes/EQEQ optimized for SSP6
Frequency Response20 Hz – 20 kHz, 4/8 Ω
ConnectorsInput: Dante (RJ45); Output: Euroblock
RegulatoryUL 2043 listed, CE, RoHS
Weight0.60 lbs (0.27 kg)
Dimensions1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

Download the RevNet PoE++ cut sheet

Download the Quick Start Guide